The Giants up to 6.5 m²

Thanks to their 12cm-wide frame profile section, the formwork elements of the XT series can reliably withstand green-cement pressures of up to 80 kN/m². The XT series is designed for large-panel wall, curved, and column formwork for hoisting by crane.

Large-panel standard elements need only two fastening points at the top of each element. When used with ­FEBE quick-fastening ­clamps, they permit very short shuttering times of approx. 0.4 hrs/m². And if that’s still not fast enough, a special largepanel element measuring 240 x 270 cm can be used to shutter 6.5 m² with a single element.

Wedges and bolts can be used to make large-panel composite elements for faster positioning in repetitive work cycles. The wedges and bolts do not extend beyond the element frame, so these composite elements can be stacked flat.

Thanks to the series production of various element widths, just about any ground plan can be shuttered with our standard range of products. This means that you will not need expensive, special-purpose formworks or costly accessories.

Your benefits

  • 6.5 m² using just one element
  • Up to 80 kN green concrete pressure!
  • Fast positioning of large-panel walls
  • Flexibility via wide range of element widths
  • Stack-up element assembly system
  • Can be set-up vertically and crossways

At a glance

Steel formwork

Frame thickness: 12 cm
Material: Steel, powder-coated
Union between elements: 2 quick-fastening clamps
Green concrete pressure: 80 kN/m²
Shuttering time: 0.2/0.4 h/m²